'\" t
.\"     Title: nvme-security-recv
.\"    Author: [FIXME: author] [see http://www.docbook.org/tdg5/en/html/author]
.\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
.\"      Date: 11/21/2025
.\"    Manual: NVMe Manual
.\"    Source: NVMe
.\"  Language: English
.\"
.TH "NVME\-SECURITY\-RECV" "1" "11/21/2025" "NVMe" "NVMe Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el       .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
nvme-security-recv \- Security Recv command
.SH "SYNOPSIS"
.sp
.nf
\fInvme security\-recv\fR <device> [\-\-size=<size> | \-x <size>]
                        [\-\-secp=<security\-protocol> | \-p <security\-protocol>]
                        [\-\-spsp=<protocol\-specific> | \-s <protocol\-specific>]
                        [\-\-nssf=<nvme\-specific> | \-N <nvme\-specific>]
                        [\-\-al=<allocation\-length> | \-t <allocation\-length>]
                        [\-\-namespace\-id=<nsid> | \-n <nsid>] [\-\-raw\-binary | \-b]
                        [\-\-output\-format=<fmt> | \-o <fmt>] [\-\-verbose | \-v]
                        [\-\-timeout=<timeout>]
.fi
.SH "DESCRIPTION"
.sp
The Security Receive command transfers the status and data result of one or more Security Send commands that were previously submitted to the controller\&.
.sp
The association between a Security Receive command and previous Security Send commands is dependent on the Security Protocol\&. The format of the data to be transferred is dependent on the Security Protocol\&. Refer to SPC\-4 for Security Protocol details\&.
.sp
Each Security Receive command returns the appropriate data corresponding to a Security Send command as defined by the rules of the Security Protocol\&. The Security Receive command data may not be retained if there is a loss of communication between the controller and host, or if a controller reset occurs\&.
.SH "OPTIONS"
.PP
\-n <nsid>, \-\-namespace\-id=<nsid>
.RS 4
Target a specific namespace for this security command\&.
.RE
.PP
\-N <nssf>, \-\-nssf=<nssf>
.RS 4
NVMe Security Specific field\&. If using security protocol EAh assigned for NVMe use, the NVMe security specific field indicates which reply memory buffer target\&.
.RE
.PP
\-x <size>, \-\-size=<size>
.RS 4
Size of buffer to allocate\&. One success it will be printed to STDOUT\&.
.RE
.PP
\-p <security\-protocol>, \-\-secp=<security\-protocol>
.RS 4
Security Protocol: This field specifies the security protocol as defined in SPC\-4\&. The controller shall fail the command with Invalid Parameter indicated if a reserved value of the Security Protocol is specified\&.
.RE
.PP
\-s <security\-protocol\-specific>, \-\-spsp=<security\-protocol\-specific>
.RS 4
SP Specific: The value of this field is specific to the Security Protocol as defined in SPC\-4\&.
.RE
.PP
\-t <allocation\-length>, \-\-al=<allocation\-length>
.RS 4
Allocation Length: The value of this field is specific to the Security Protocol as defined in SPC\-4\&.
.RE
.PP
\-b, \-\-raw\-binary
.RS 4
Print the raw buffer to stdout\&. Defaults to print in hex\&.
.RE
.PP
\-o <fmt>, \-\-output\-format=<fmt>
.RS 4
Set the reporting format to
\fInormal\fR,
\fIjson\fR
or
\fIbinary\fR\&. Only one output format can be used at a time\&.
.RE
.PP
\-v, \-\-verbose
.RS 4
Increase the information detail in the output\&.
.RE
.PP
\-\-timeout=<timeout>
.RS 4
Override default timeout value\&. In milliseconds\&.
.RE
.SH "EXAMPLES"
.sp
No Examples
.SH "NVME"
.sp
Part of the nvme\-user suite
